How to initialize LXD¶

Before you can create a LXD instance, you must configure and initialize LXD.

Interactive configuration¶

Run the following command to start the interactive configuration process:

lxd init

Note

For simple configurations, you can run this command as a normal user. However, some more advanced operations during the initialization process (for example, joining an existing cluster) require root privileges. In this case, run the command with sudo or as root.

The tool asks a series of questions to determine the required configuration. The questions are dynamically adapted to the answers that you give. They cover the following areas:

Clustering (see About clustering and How to form a cluster)

A cluster combines several LXD servers. The cluster members share the same distributed database and can be managed uniformly using the LXD client (lxc) or the REST API.

The default answer is no, which means clustering is not enabled. If you answer yes, you can either connect to an existing cluster or create one.

MAAS support (see maas.io and MAAS - Setting up LXD for VMs)

MAAS is an open-source tool that lets you build a data center from bare-metal servers.

The default answer is no, which means MAAS support is not enabled. If you answer yes, you can connect to an existing MAAS server and specify the name, URL and API key.

Networking (see About networking and Network devices)

Provides network access for the instances.

You can let LXD create a new bridge (recommended) or use an existing network bridge or interface.

You can create additional bridges and assign them to instances later.

Storage pools (see About storage pools, volumes and buckets and Storage drivers)

Instances (and other data) are stored in storage pools.

For testing purposes, you can create a loop-backed storage pool. For production use, however, you should use an empty partition (or full disk) instead of loop-backed storage (because loop-backed pools are slower and their size can’t be reduced).

The recommended backends are zfs and btrfs.

You can create additional storage pools later.

Remote access (see Access to the remote API and Remote API authentication)

Allows remote access to the server over the network.

The default answer is no, which means remote access is not allowed. If you answer yes, you can connect to the server over the network.

You can choose to add client certificates to the server (manually or through tokens, the recommended way) or set a trust password.

Automatic image update (see About images)

You can download images from image servers. In this case, images can be updated automatically.

The default answer is yes, which means that LXD will update the downloaded images regularly.

YAML lxd init preseed (see Non-interactive configuration)

If you answer yes, the command displays a summary of your chosen configuration options in the terminal.

Minimal setup¶

To create a minimal setup with default options, you can skip the configuration steps by adding the --minimal flag to the lxd init command:

lxd init --minimal

Note

The minimal setup provides a basic configuration, but the configuration is not optimized for speed or functionality. Especially the dir storage driver, which is used by default, is slower than other drivers and doesn’t provide fast snapshots, fast copy/launch, quotas and optimized backups.

If you want to use an optimized setup, go through the interactive configuration process instead.

Non-interactive configuration¶

The lxd init command supports a --preseed command line flag that makes it possible to fully configure the LXD daemon settings, storage pools, network devices and profiles, in a non-interactive way through a preseed YAML file.

For example, starting from a brand new LXD installation, you could configure LXD with the following command:

    cat <<EOF | lxd init --preseed
config:
  core.https_address: 192.0.2.1:9999
  images.auto_update_interval: 15
networks:
- name: lxdbr0
  type: bridge
  config:
    ipv4.address: auto
    ipv6.address: none
EOF

This preseed configuration initializes the LXD daemon to listen for HTTPS connections on port 9999 of the 192.0.2.1 address, to automatically update images every 15 hours and to create a network bridge device named lxdbr0, which gets assigned an IPv4 address automatically.

Re-configuring an existing LXD installation¶

If you are configuring a new LXD installation, the preseed command applies the configuration as specified (as long as the given YAML contains valid keys and values). There is no existing state that might conflict with the specified configuration.

However, if you are re-configuring an existing LXD installation using the preseed command, the provided YAML configuration might conflict with the existing configuration. To avoid such conflicts, the following rules are in place:

The provided YAML configuration overwrites existing entities. This means that if you are re-configuring an existing entity, you must provide the full configuration for the entity and not just the different keys.
If the provided YAML configuration contains entities that do not exist, they are created.

This is the same behavior as for a PUT request in the REST API.

Rollback¶

If some parts of the new configuration conflict with the existing state (for example, they try to change the driver of a storage pool from dir to zfs), the preseed command fails and automatically attempts to roll back any changes that were applied so far.

For example, it deletes entities that were created by the new configuration and reverts overwritten entities back to their original state.

Failure modes when overwriting entities are the same as for the PUT requests in the REST API.

Note

The rollback process might potentially fail, although rarely (typically due to backend bugs or limitations). You should therefore be careful when trying to reconfigure a LXD daemon via preseed.

Default profile¶

Unlike the interactive initialization mode, the lxd init --preseed command does not modify the default profile, unless you explicitly express that in the provided YAML payload.

For instance, you will typically want to attach a root disk device and a network interface to your default profile. See the following section for an example.

Configuration format¶

The supported keys and values of the various entities are the same as the ones documented in the REST API, but converted to YAML for convenience. However, you can also use JSON, since YAML is a superset of JSON.

The following snippet gives an example of a preseed payload that contains most of the possible configurations. You can use it as a template for your own preseed file and add, change or remove what you need:

# Daemon settings
config:
  core.https_address: 192.0.2.1:9999
  core.trust_password: sekret
  images.auto_update_interval: 6

# Storage pools
storage_pools:
- name: data
  driver: zfs
  config:
    source: my-zfs-pool/my-zfs-dataset

# Storage volumes
storage_volumes:
- name: my-vol
  pool: data

# Network devices
networks:
- name: lxd-my-bridge
  type: bridge
  config:
    ipv4.address: auto
    ipv6.address: none

# Profiles
profiles:
- name: default
  devices:
    root:
      path: /
      pool: data
      type: disk
- name: test-profile
  description: "Test profile"
  config:
    limits.memory: 2GiB
  devices:
    test0:
      name: test0
      nictype: bridged
      parent: lxd-my-bridge
      type: nic